In Airwave, switch is not displayed on the network map of client-diagnostic page properly.
Currently if there is only 1 switch between AP and controller then network map is displayed correctly but if there is more than 1 switch then there is no way for Airwave to deterministically conclude that 2nd switch onwards falls in the network path between AP and Controller . For eg 2nd switch is connected to 1st switch (connected to AP) but it is not connected to the controller or to another intermediate switch which is in that path ( AP <-> s/w… <-> controller), hence it is an expected behavior as per the current design.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.