Network Management

last person joined: 23 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

8.0 Airwave Hardware Requeriments for a 500 device network?

This thread has been viewed 0 times

  • 1.  8.0 Airwave Hardware Requeriments for a 500 device network?

    Posted Jul 30, 2014 01:41 PM

    Hi guys,

    I'm checking the Server Sizing Guides for the 7.7 and 8.0 Airwave versions.
    In the 7.7 Sizing Guide shows requirements for a 500 devices network, but in the 8.0 Sizing Guide shows only requirements for a 1500 and 4000 device networks.

     

    I need to install Airwave 8.0 for a small network with less than 500 devices. So I need to know the hardware requirements for a server with 500 devices maximum.

    Can anyone give me some advice with this?
    Can I use the recommendations given in the 7.7 Sizing guide for a 500 devices networks?

     

    Also, another question I have is,

    Is it possible to install Airwave using another RAID different than 1+0? The end-customer only has RAID3 in their servers.

    Thanks in advance.
    Regards!



  • 2.  RE: 8.0 Airwave Hardware Requeriments for a 500 device network?

    EMPLOYEE
    Posted Jul 30, 2014 04:04 PM

    I think you will be fine following the 7.7 sizing guide.  If anything, maybe give it a little more ram.



  • 3.  RE: 8.0 Airwave Hardware Requeriments for a 500 device network?

    Posted Jul 30, 2014 05:20 PM

    Thanks Michael,

     

    So I guess following the 7.7 guide will be ok.

     

    Do you know something about the RAID issue? Is it possible to install Airwave with a server using RAID3 or something different than RAID1+0?

     

    Regards,



  • 4.  RE: 8.0 Airwave Hardware Requeriments for a 500 device network?

    EMPLOYEE
    Posted Jul 31, 2014 05:12 AM

    I think it would be safe to follow the recommended specs.

     

    Sorry, I know nothing about RAID stuff.