Network Management

Reply
Contributor II

AMON not collecting data

Hi,

 

We have 5 M3 controllers running ArubaOS 6.3.1.3 and an Airwave on 7.7.10. 

 

I've just enabled AMON on the controllers and Airwave, but I cannot see any data on Airwave Firewall tab. Have some way to troubleshooting this issue?

 

On Controller I"ve configured like this:

 

mgmt-server type amp primary-server AIRWAVE_IP profile default-amp
!
mgmt-server profile "default-amp"
stats-enable
tag-enable
sessions-enable
monitored-info-enable
monitored-stats-enable
misc-enable
location-enable
!

 

On Airwave I've enable this options:

 

Enable AMON Data Collection: YES

Enable Firewall Data Collection: YES

Prefer AMON vs SNMP Polling: YES

Enable Syslog and SNMP Trap Collection: YES

 

 

Airwave can connect on all controllers using SNMP Trap, SSH, Telnet, enable, etc....

 

 

Regards,

Paulo Raponi

Guru Elite

Re: AMON not collecting data

Is there a firewall between them? You'll need UDP 8211 open. (PAPI)

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: