Rob,
Thank you for your response, I tried some of your suggestions, the SNMP string is correct, no issues here.
The CLI is able to poll the devices via SNMPv2...
SNMPv2-MIB::sysName.0 = STRING: LHBWAP0001
The web interface however still comes back with 'Down (SNMP get failed)' even with 60 seconds set for the timeout, I checked our other management tools and they are able to poll these devices while set to 4 seconds.
One thing I noticed, in the device communications page, i see this message:
'If this device is down because the credentials on the device have changed, update the fields below with the correct information.
This device is currently using SNMP version 1'
The device is actually using SNMP v2, I've checked everywhere and its set to V2 but this page still states V1...
Any ideas?
Thanks,
Shane.