Network Management

Reply
Highlighted
New Contributor

Adding a Wired Switch (not a AP) to a Floor Plan

Hi Everyone

 

I am looking for a solution of how to show not only our AP's on floorplans, but also the location of our Aruba 2530 switches (8/24/48 port)

 

The idea is that we can see on one plan the locations of these switches in the remote comm cabinets, alongside the AP data and heat maps.

 

Its really for point of reference rather than needing any active data.

 

Cheers

Craig

 

 

 

 


Accepted Solutions
Highlighted
MVP Expert

Re: Adding a Wired Switch (not a AP) to a Floor Plan

Currently we do not have this feature , please file one at

 

innovate.arubanetworks.com/


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post


All Replies
Highlighted

Re: Adding a Wired Switch (not a AP) to a Floor Plan

This would be a useful feature. Also it would be nice to add items to network topology manually.

Highlighted
Guru Elite

Re: Adding a Wired Switch (not a AP) to a Floor Plan


@triggers88 wrote:

Hi Everyone

 

I am looking for a solution of how to show not only our AP's on floorplans, but also the location of our Aruba 2530 switches (8/24/48 port)

 

The idea is that we can see on one plan the locations of these switches in the remote comm cabinets, alongside the AP data and heat maps.

 

Its really for point of reference rather than needing any active data.

 

Cheers

Craig

 

 

 

 


Are you referring to the "wiring closet" feature in Airwave?

Screenshot 2019-12-12 at 12.14.07.pngScreenshot 2019-12-12 at 12.14.24.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN
Highlighted
New Contributor

Re: Adding a Wired Switch (not a AP) to a Floor Plan

Thanks cjoseph

But I am not looking for a wiring closet layout.

 

I'm looking to add Wired switches to a floorplan, in the same way you can add wireless access ports....

 

Highlighted
MVP Expert

Re: Adding a Wired Switch (not a AP) to a Floor Plan

Currently we do not have this feature , please file one at

 

innovate.arubanetworks.com/


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: