04-16-2014 11:41 AM
In AirWave 7.7.10, why would we not be seeing any data populating under Home>Firewall? For top 3 destinations or applications, we see "No data available". Is there something that needs to be enabled on the controller?
Solved! Go to Solution.
Re: AirWave - Firewall data
04-16-2014 08:26 PM
On your controller(s), issue the following command:
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
04-17-2014 12:22 AM
There is something to enable on the controller yes. AMON.
At the CLI, this should work as a template to enable it (where X.X.X.X is Airwave).
mgmt-server profile amp1
mgmt-server type amp primary-server X.X.X.X profile amp1
Then in Airwave, check AMON is enabled ("Enable AMON Data Collection" set to yes) under AMP Setup>General>Additional AMP Services (bottom right of this screen).