05-20-2019 08:22 PM
In 220.127.116.11 there appears to be a new tab on the Devices->Montitor page called 'Advanced Monitoring'.
When I click this I can see device info such as Hostname, IP, Firmware.
All the other fields/tables/graphs are blank: WAN, Performance, VPN tunnels.
There are definitely multiple VPN tunnels terminating on this MC, and this is shown in other Airwave screens.
The device I'm trying to view is a 7010 running 18.104.22.168, in standalone mode. AMON is enabled.
Is there something I need to configure to get data appearing on this Advanced Monitoring screen? Maybe this screen is only for SD-WAN devices?
Solved! Go to Solution.
05-21-2019 05:37 AM
WAN tunnels will show only if you add both branch office controller (BOC) and VPN controller (VPNC) in Airwave.
We have few issues related to proper WAN data not updating in Airwave which will be get fixed in future Airwave release.
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.