Network Management

In 8.2.8.2 there appears to be a new tab on the Devices->Montitor page called 'Advanced Monitoring'.

When I click this I can see device info such as Hostname, IP, Firmware.

All the other fields/tables/graphs are blank: WAN, Performance, VPN tunnels.

There are definitely multiple VPN tunnels terminating on this MC, and this is shown in other Airwave screens.

The device I'm trying to view is a 7010 running 8.4.0.2, in standalone mode. AMON is enabled.

Is there something I need to configure to get data appearing on this Advanced Monitoring screen? Maybe this screen is only for SD-WAN devices?

WAN tunnels will show only if you add both branch office controller (BOC) and VPN controller (VPNC) in Airwave.

We have few issues related to proper WAN data not updating in Airwave which will be get fixed in future Airwave release.

Hi

it now AirWave  8.2.11.0 and still not working , is i should do any additional configuration to make it work 

thanks 

Are you not seeing Advanced monitoring data for both BOC and VPNC controllers in Airwave.

Have you added airwave as management server and in management profile does this stats are enabled?

Stats                               Enabled

Stats_Ext                           Enabled

WAN State Info                      Enabled

In my running config have below config and shows data in my server.

uplink wired vlan 12 uplink-id name uplink_mpls_12_13_mpls
   wan-type MPLS
   weight 10
!
uplink wired vlan 94 uplink-id name uplink_inet_94_90_inet
   wan-type Internet
   weight 10
!
uplink health-check ip xxx.arubanetworks.com
uplink health-check
uplink load-balance mode uplink-utilization