Network Management

Reply

Airwave - AppRF report, top destinations not filtering on role or ssid

I am trying to run an AppRF report in Airwave for a particular ssid and role.  What I am seeing is that the top applications and top destinations charts seem to include all ssids/roles.  I can tell this because there are some destinations listed which are blocked in the particular role.

 

Further down, there is a chart for that role, but it only shows the applications.  There is not one for the destinations.

 

Is this expected behaviour?

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Guru Elite

Re: Airwave - AppRF report, top destinations not filtering on role or ssid

Do you have a screenshot of the options as well as the output of the report?  You might get better service if you open a TAC case in parallel, so that they can take a look at the specifics.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: Airwave - AppRF report, top destinations not filtering on role or ssid

I think this is just the way it is.  The filter is not applied to the 'top application' and 'top destinations' charts.

I put in these options.

airwave-apprf-report def.JPG

 

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: