Trying to install Airwave onto a new Dell server and keep getting the error 'no usable disk found'
Could be mistaken be it looks like it can't recognise the Raid controller (perc h730) and/or doesn't have the drivers.
Any advice how to proceed?
Did you provision the disks in the RAID configuration pre-boot?
yes, did that.
You may need to interrupt the installer to allow for 3rd party drivers to account for that particular RAID card. Try opening a support case if that doesn't work.
@rgin wrote:You may need to interrupt the installer to allow for 3rd party drivers to account for that particular RAID card. Try opening a support case if that doesn't work.
How do I do that and install these drivers?
At the ISO install prompt, you can try:
# install dd
This should work, but I've not had to run through the 3rd party install in a long time.
It should prompt for 3rd party driver install before going into the regular OS install.
couldn't manage to get that to work. TAC advised to put a base Centos 6.5 install on and follow these instructions.
https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/Install-AirWave-8-0-on-RedHat-RHEL
All done and looking good.
:-)
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.