Hello,
So it looks like now the Airwave is pulling the configuration.
The issue now is that the Controller configuration does not match what the Airwave group is configured for.
If you are only monitoring your controller with Airwave, you can simply import the configuration from the controller to the group. If you have multiple devices in the group, you should make sure non are managed as this might cause mismatches in their configuration. If this is the only device you should be fine importing the configration.
Click on the mismatch link beside Configuraiton: and from there it should show you the difference in config from the controller vs the Airwave group. If you want the configuraiton which is on the controller to be used for the group, click on the Import button, and then review the changes.
Once you import the configuraiton from the device to the group, you should no longer have a Mismatch.
_ELiasz