Network Management

Server Spec:

CPU:E5-2640 v3 8C (90W) 2.6GHZ 20MB CACHE 1866 Mhz

Memory:60 GB DDR4

HD: 6TB 7.2K RAID 1+0

What is the sugget the performance setting?

Thanks

Also, other factors that would be needed to help figure out how to better fine tune for performance:

1) number of monitored infrastructure devices (switches/controllers/APs)

2) client behavior (office [same clients everyday] vs hotspot/store [new unique clients daily])

3) amount of clients at peak hours

4) number of campus/buildings/floor plans in VisualRF

5) is there plan for network growth?

1) number of monitored infrastructure devices (switches/controllers/APs)
1 controller
90 APs

2) client behavior (office [same clients everyday] vs hotspot/store [new unique clients daily])
office

3) amount of clients at peak hours
about 100

4) number of campus/buildings/floor plans in VisualRF
2 buildings
HQ 12 floor
IT 14 floor

5) is there plan for network growth?
It was planned to be about 400 APs and 500 Clients on 2017.

Thanks

Sizing looks good for that type of deployment.  Like @pmonardo said, you should have at least 15k RPM disk drives or better since AirWave is disk I/O intensive.