Network Management

Reply
Highlighted
New Contributor

Airwave Reports Definition - change or create own customer definitions

Hi there,

we use Airwave 8.2.9.1 and have created customer reports.

 

Unfortunately, we cannot select enough information about the ports when we create a report.

 

We want to generate a report that reflects the last month. (Historical data)

 

Under Customer Options we select "Ports Usage: Ports" and can only select the following:
Name
Port mode
Device
Alias
MAC
Used
Description
Traffic In
Traffic out
Max Traffic In
Max traffic out


But we also need the following in that selection so that the report can be used by us:
Device location
Port admin status
Port Use PoE

Port Speed

Port Spanning Tree Status

 

Is there a way to get this data for the report?

 

TL;DR: We need more data fields from all switch ports to create a special report.

 

Screenshots:

Custom Report.png

Custom Options.pngPorts Select Data1.pngPorts Select Data2.png

 

 


Accepted Solutions
Highlighted

Re: Airwave Reports Definition - change or create own customer definitions

Device Location is based on Devices and is separate table not native to ports. Hence AirWave doesnt get the Location based on port basis. Please open feature request for this too. Other way is to manually merge the devices CSV file to Port CSV file (from reports) to get the data needed.

View solution in original post


All Replies
Highlighted

Re: Airwave Reports Definition - change or create own customer definitions

Hello Carstens,

 

Except the Device location, we do not have an option to report this info in the reports as of today.

 

Port admin status
Port Use PoE

Port Speed

Port Spanning Tree Status

 

I would recommend you to file a feature request for the same @ innovate.arubanetworks.com

 

 

--

 

-If you got what you need with my answer please give kudos and mark it as solution.
Highlighted
New Contributor

Re: Airwave Reports Definition - change or create own customer definitions

Hello Fayyaz Mohammed,

 

You wrote: "Except the Device location, we do not have an option to report this info in the reports as of today."

 

How can I get the information "Device location" in the report in the list of the Ports? I only get this information in the list of Devices (Switch). I also need this info in the list of ports ...

 

I will make a feature request for the other information.

 

regards

Carstens

Highlighted

Re: Airwave Reports Definition - change or create own customer definitions

Device Location is based on Devices and is separate table not native to ports. Hence AirWave doesnt get the Location based on port basis. Please open feature request for this too. Other way is to manually merge the devices CSV file to Port CSV file (from reports) to get the data needed.

View solution in original post

Highlighted

Re: Airwave Reports Definition - change or create own customer definitions

Hi Carstens,

 

Location is by default, present in the port usage report. if the location shows up in the monitor page of the switch on Airwave and if we have the "location" column selected in the report definition it will show that switch's location in this port usage report.  see attached report, i ran in my lab.

Screen Shot 2020-02-27 at 11.20.16 AM.png

-If you got what you need with my answer please give kudos and mark it as solution.
Highlighted
New Contributor

Re: Airwave Reports Definition - change or create own customer definitions

ok, I made a feature request:  https://innovate.arubanetworks.com/ideas/NMS-I-1654

 

 

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: