HI, I would just like to get a better understanding about the process for discovering and polling devices via Airwave, hopefully someone could assist.
This is how I understand it:
1. Device is discovered via a scanning profile configured in Device Setup -> discover tab, using SNMPv2 community string.
2. Device is added to the NEW folder in Devices tab.
3. Manually move the device to a folder and group.
4. The group assignment determines which communication profile is available for ongoing polling i.e. ArubaOS switch, where additional SNMP/TELNET/SSH configuration is provided.
5. The communication profile information is written to the device profile under manage tab.
Does this sound correct or am I misunderstanding it?
Thanks in advance
Regards
Dale