Network Management

New Contributor

Airwave can't add Aruba 2530 switches

Hi I have recently got some Aruba 2530 switches with the latest firmware on. On the switch I can add the Airwave settings to add the device to Airwave. 


On the Airwave I can see the folder I have added from the switch but the switch it self I can not see. 

MVP Guru

Re: Airwave can't add Aruba 2530 switches



We need to provide switch details in Airwave to add the device. Naviaget to Device Setup > Add  page and click add to manually add the device.


Note: Make sure configure snmp community string in swtich before adding the swtich to airwave.We need to proivde IP addresss, telnet/ssh and community details.




If my post addresses your query give kudos:)

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: Airwave can't add Aruba 2530 switches

Hi Pavan, 


Do you have any reference on how to do the config, via cli or web



Search Airheads
Showing results for 
Search instead for 
Did you mean: