Network Management

Reply
Highlighted
Occasional Contributor II

Airwave clear all Rapids

Is there an easy way to do this? we have 61000 in there and i think it is slowing the entire system down. and deleting 500 at a time and then hitting apply crashes the GUI 

 

just delete it I dont need to apply the delete.......... ugh 

Frequent Contributor II

Re: Airwave clear all Rapids

Hello Andrew,

 

do you have access to open a TAC case, they can simple run a DB query, it will delete all the rogues in one go. 

 

unfortunately, with the limited access you cannot do it yourself now. with the airwave versions 8.2.x and above.

 

--

 

-If you got what you need with my answer please give kudos and mark it as solution.
Occasional Contributor II

Re: Airwave clear all Rapids

most of them are unclass 

 

Unclassified 59884

Frequent Contributor II

Re: Airwave clear all Rapids

Private message me your email address, i will work with you. I am from the ERT TAC.

 

 

--

 

-If you got what you need with my answer please give kudos and mark it as solution.
Frequent Contributor II

Re: Airwave clear all Rapids

Worked with Andrew and cleared all the Rapids from the DB.

 

Hello Andrew, thank you for your time, it was nice talking to you, have a great day. 

 

--

 

-If you got what you need with my answer please give kudos and mark it as solution.
Occasional Contributor II

Re: Airwave clear all Rapids

thank you. 

 

is there a rule i can make to just auto ignore them ? 

Frequent Contributor II

Re: Airwave clear all Rapids

No, they will be there, we cannot have any rogue to not get classified and dropped in Airwave as of today, they will be there with some classification, and will get cleared based on the retention setting. we can raise a feature request to ignore rogues, by dropping them off automatically from the db, if the certain rule matches, but then, they will come back again, when they get discovered again, based on the polling, so too much over head of processing for Airwave. 

-If you got what you need with my answer please give kudos and mark it as solution.
Occasional Contributor II

Re: Airwave clear all Rapids

i know in the GUI you can ignor them, that would be nice to do in the rules 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: