Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Airwave keeps complaining about configure mis-match for a Virtual Controller cluster.

This thread has been viewed 7 times

  • 1.  Airwave keeps complaining about configure mis-match for a Virtual Controller cluster.

    Posted Feb 09, 2015 04:25 PM

    I have a 3-IAP (2-IAP215 with 1-IAP109) cluster managed on Airwave (v8.0.6.3). Periodically, Airwave will complain of mismatch for the cluster, like below. (I normally just click Repair to kick it away but several times a day is really annoying) 

    22.png

    However I do not see any mismatch configuration under Instant Config-> AirWave->Mismatches.

     

    If I go to Instant Config-> AirWave->Config History, I can see following.

    1.PNG

    So now, I would like to understand more about why it keeps complaining? Should I turn on auto-repair mode? If so, how to modify the group to do so?

     

    Thanks,

    /S

     



  • 2.  RE: Airwave keeps complaining about configure mis-match for a Virtual Controller cluster.

    Posted Feb 11, 2015 01:29 AM
    Please check Rapids Containment Options->if enabled Manage rogue AP containment? if yes, that is reason why airwave->monitor page display mismatch but can't find any thing in IGC->mismatch. dev is coding to fix this, aims to fix this in future release 8.0.7.


  • 3.  RE: Airwave keeps complaining about configure mis-match for a Virtual Controller cluster.

    Posted Feb 11, 2015 09:46 AM

    That is the case for my setup.

     

    Do you have an ETA for the fix?