12-09-2014 03:25 AM
is there any way to extract from the Aruba controller to the Airwave how full the DHCp scope on the controller is?
Some customers prefer to have the controller do DHCP for guest network, and it's easy enough to check status of the scope by CLI, but would be handy to have the airwave present how full the scope is. Suspect this isn't supported.
Solved! Go to Solution.
12-09-2014 04:30 AM
Unfortunately, there is no visibility into the controller DHCP scope from Airwave.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos