Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Are SNMP Traps/Informs Required for AirWave?

This thread has been viewed 7 times

  • 1.  Are SNMP Traps/Informs Required for AirWave?

    Posted Feb 19, 2019 01:10 PM

    We're integrating our Aruba platform into our enterprise alerting pipeline that will bypass AirWave. This involves adding a few new SNMP trap receivers, but with the default enabled traps list so large, I'm worried we might overwhelm the new servers.

     

    There are quite a few that I think are unnecessary, but it's unclear to me if AirWave is making use of those traps in the backend. A good example would be `wlsxUserEntryCreated`. Can I safely disable that trap without impacting AirWave data integrity?

     

    Alternatively, is it possible to enable/disable trap receivers on a per-OID basis?



  • 2.  RE: Are SNMP Traps/Informs Required for AirWave?

    EMPLOYEE
    Posted Feb 20, 2019 10:58 AM

    Checkout the Best Practices guide (appendix A) - there's a list of the traps AirWave processes.