Aruba OS v8 migration, testing
02-22-2018 08:52 AM
We are in the process of migratiting to v8 and would like to do some testing. Specifically, I would like to be able to point an exisiting AP 205 on OS 6.5 to the new environment. I have tried manually updating the server and master parameters on the AP but that does not seem to work. aruba-master is pointing to the exisiting 6.5 evironment so I don't want to use ADP. Any suggestions? Thanks!
Re: Aruba OS v8 migration, testing
02-22-2018 11:37 AM
That should actually work, can you share the commands you used ?
A few things:
- If that AP was previously provisioned to be used in your 6.5 environment make sure you use the same AP-Group name in AOS 8 that you had assigned on your 6.5 controllers.
- Confirm that you assigned the License under the folder you have your test controllers.
- CPSec is enabled by default so you can approve the AP manually or enable autoprovision
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA