Network Management

Reply
Highlighted
Occasional Contributor I

Cant undo aaa command

Hey i set aaa fuction on specific port

And i want to remove it from the port.

I removed every command but I cant remove only 2 command:

 

aaa port-access authenticator tx-pperiod 10

aaa port-access authenticator supplicant-timeout 60

 

i try to remove by: no aaa port-access authenticator tx-pperiod

or: no aaa port-access authenticator supplicant-timeout

Module not present for port or invalid port: tx-period

Module not present for port or invalid port: supplicant-timeout

 

So how i remove thats command ??

 

 

MVP Guru

Re: Cant undo aaa command

You will need to set it back to the default value (30 seconds for both) and the command disappears from the config:

sw01(config)# show running-config int 6

Running configuration:

interface 6
   untagged vlan 32
   aaa port-access authenticator tx-period 10
   aaa port-access authenticator supplicant-timeout 60
   exit

sw01(config)# aaa port-access authenticator 6 tx-period 30
sw01(config)# aaa port-access authenticator 6 supplicant-timeout 30
sw01(config)# show running-config int 6

Running configuration:

interface 6
   untagged vlan 32
exit

You can look up the default values in the ArubaOS-Switch Access Security Guide (for these port security/aaa commands).

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Occasional Contributor I

Re: Cant undo aaa command

Thank you very much its work.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: