Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Configure Airwave SNMP Trap for change of status of uplink interface of IAP

This thread has been viewed 3 times

  • 1.  Configure Airwave SNMP Trap for change of status of uplink interface of IAP

    Posted Apr 21, 2016 08:33 AM

    HI,

    is possible to configure on the airwave an SNMP traps when opertstate of wired IAP's interface goes down?

     

    In the monitor i see that one IAP ethernet interace have for admin statu  "UP" but the operation status is "Down".

    operstat.jpg

    Is possible to confure an SNMP traps / Alert for this event ?



  • 2.  RE: Configure Airwave SNMP Trap for change of status of uplink interface of IAP

    EMPLOYEE
    Posted Apr 23, 2016 05:21 AM

    Is that AP online when this happens?  I am wondering what the true state of that AP is.  If the AP is not online, you can just set a trigger for the AP being down, otherwise, you will have to look at the trap received by Airwave and write a rule for it.



  • 3.  RE: Configure Airwave SNMP Trap for change of status of uplink interface of IAP

    Posted May 23, 2016 04:37 AM

    Hi,

    yes the IAP is online but it works in bridge with other AP.

    I need to know when the operational status change, how can i check it?

     

    Regards

    Andrea Acampa