Network Management

Reply
Frequent Contributor I

Configure rogue detection in AirWave 8

Is there a trick to configuring rogue detection in AirWave?

 

I see plenty of 'suspected neighbors' but zero rogues

 

Guru Elite

Re: Configure rogue detection in AirWave 8

Do you have your edge switching in AirWave?

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Frequent Contributor I

Re: Configure rogue detection in AirWave 8

I do now!

And the rogues showed up

 

 

Thank you

Frequent Contributor I

Re: Configure rogue detection in AirWave 8

How exactly does the switch come into play?

 

I added a single core switch from one campus,

and the result is I can now detect rogues at all my sites...

 

Which is great, just curious as to why

Guru Elite

Re: Configure rogue detection in AirWave 8

MAC address correlation. If all of your layer 3s are in that core, then it makes sense.


Thanks,
Tim

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: