Network Management

Occasional Contributor I

Disabling Level 3 mode of 3810 Aruba switch stack



I have two 3810 aruba switch stacks with core functions. Both devices are working with Level 3 mode. One of them will follow working on that mode but the other one will work only on level 2 mode.


I know "no ip routing" is command to downgrade that stack from level 3 mode to level 2 mode but i don´t find any information about how that modification might affect to current configuration. Will definied static routes being removed? Will defined vlans being removed?


I don´t have any 3810 aruba switch to test that configuration.


Thank you.


Best regards,

Search Airheads
Showing results for 
Search instead for 
Did you mean: