Network Management

Reply
Occasional Contributor II

Re: Error in CAD Layers

Nope, it doesn't work with another file either.

MVP Guru

Re: Error in CAD Layers

Could you try remove the visualrf bootstrap file and check the status.

 

  • Disable visualrf engine from visualrf>setup page
  • Remove visualrf_bootstrap cache file from server

# cd /var/airwave/cache/

# rm -rf visualrf_bootstrap

 

  • Enable visularf engine

Regards,

Pavan

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Error in CAD Layers

No change.

Can it be that the reason for this is changing .dwg files version before upload. I need to get CAD files in AC1024/1021/1018 format, but while doing that I get these messages from AutoCAD:

AutoCAD #1.jpg

AutoCAD #1.jpg

MVP Guru

Re: Error in CAD Layers

What version of dwg file it is showing, when you open the file in notepad?

 

Do you have any other dwg file to test, before saving it to lower version, make a copy of this original file and try save it as autocad file and check the stauts.

 

Regards,

Pavan

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Error in CAD Layers

I did try it before when I had problems uploading CAD files: http://community.arubanetworks.com/t5/Network-Management/Batch-Floor-Upload-Wizard/m-p/296566#M6762

You said that I have to convert files if I have problems with newest formats.

MVP Guru

Re: Error in CAD Layers

Ok, so those files already in AC1024/1021/1018 format ? Could you share your dwg file, I will check in my server.

 

Regards,

Pavan

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Error in CAD Layers

The Original.dwg I cant't upload and in ACAD_2010-Original.dwg can't choose/set wall type.

MVP Guru

Re: Error in CAD Layers

You could send file from Airheads message options, top right.

 

Regards,

Pavan

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Error in CAD Layers

Added them as .zip file in previous message

MVP Guru

Re: Error in CAD Layers

Hi

 

I am not able to upload any of the dwg files its looks some issue with files.

 

Since you are able to upload the dwg files, as a work around we could manually draw the walls once floor provision is done, else we need to get the files in mentioned format and check the status.

 

Regards,

Pavan

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: