Network Management

Occasional Contributor I

Few information about radius events on Airwave

Dear all,


I'm using Airwave to monitor my Wifi infrastructure (2 Aruba controller 7220), I activated SNMP/AMON on the controllers and I monitor all the devices. AMON is prefered over SNMP on Airwave.


But when I want to have more information on the authentication failure, I get few information as you can see on the picture attached. The autenthication failure are for a 802.1X SSID with a NPS Radius.


On the controller, the mgmt-server profile is configured this way:


Mgmt Config profile "amp-default"
Parameter Value
--------- -----
Stats Enabled
Tag Enabled
Sessions Enabled
Monitored Info Enabled
Monitored Stats Disabled
Misc Enabled
Location Enabled
Voice Info Enabled

Should I configure something more on the controller or on Airwave ?


Thanks in advance,




Guru Elite

Re: Few information about radius events on Airwave

There will be a lot more information about authentication events in the next release.


Tim Cappalli | Aruba Security
@timcappalli | | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: