Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

HPE 5130 switches unable to add into AirWave NMS server

This thread has been viewed 2 times

  • 1.  HPE 5130 switches unable to add into AirWave NMS server

    Posted Jul 13, 2018 02:48 AM

    Hi,

    As per the below post, the HP 5130 with version 7.0 onwards will add into Aruba AirWave NMS but not able to add and showing SNMP get failed error in AirWave.

    I am trying to add with SNMPV3, I have tried HPE office connect and Universal device but no luck.

    Can anyone provide the solution please....

    Switch Model: 5130-24G-4SFP+ EI JG932A

    VENDOR_NAME          : HPE

    Version 7.1 running

     

    Thanks and regards,

    Ashok 



  • 2.  RE: HPE 5130 switches unable to add into AirWave NMS server

    EMPLOYEE
    Posted Jul 13, 2018 09:57 AM

    When adding a device for SNMPv3, you need to update the Group -> select group -> Basic tab to use SNMPv3 for that device series type.  Otherwise it will try to use the default SNMPv2.



  • 3.  RE: HPE 5130 switches unable to add into AirWave NMS server

    Posted Jul 22, 2018 03:17 AM

    Hi,

    Thank you for your reply.

    Have got a solutioin for my issue.

    Added the HP switch as a Universal device in AirWave, changed the SNMPV3 in the group and the below is the configuraion from swith end.


    snmp-agent
    snmp-agent sys-info version v3
    snmp-agent group v3 XXXX authentication write-view XXXX
    snmp-agent usm-user v3 XXXX XXXX simple authentication-mode sha <password> privacy-mode aes128 <password>

     

    Thanks and regards,

    Ashok