Network Management

Occasional Contributor I

Help logging into Airwave GUI

New to AirWave and Linux, but I think I have Airwave installed correctly in VirtualBox. See image below.


Not sure what to do next because I can't log into which is the IP address I gave AMP during the setup.


I can ping the VirtualBox machine, but not this address. Am I supposed to be able to ping this address? 


Any other ideas?  Thanks


Frequent Contributor I

Re: Help logging into Airwave GUI



have you configured ethernet bridging correctly on virtualbox?


Re: Help logging into Airwave GUI



I understand you have intalled Airwave on virtual box, may i know the host resource details?

 Have you installed virtual box on any PC and installed airwave?


We need to allocated atleast 8GB RAM and 4 cores intel xenon processor for Airwave to up and running and also make sure you have configured correct interface.


If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: Help logging into Airwave GUI

The 'Killed' messages in your screenshot do suggest that the system ran out of memory. Please check Pavan's suggestion and double-check your assigned resources (specific memory and disk).

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
Showing results for 
Search instead for 
Did you mean: