07-27-2018 02:51 PM
Figured this would have been asked before, but I couldn't find anything after a good search.
We have been monitoring our APs for a while now with Airwave. Looking to move switch monitoring over to Airwave for our 2930 series switches.
No Aruba switches seem to be present in the device listing for manually adding devices. There is a very limited assortment of HPE Procurve.
What should I use to add 2930 series switches? The Aruba device category assumes it is a wireless access point.
Solved! Go to Solution.
07-29-2018 01:12 AM
Make sure you are running the latest version of AirWave and add the Aruba 2930f as an Aruba device and you are good to go!
Works fine. The add device settings for an Aruba device are used by selecting the Aruba device, then AirWave does its ‘magic’ and will put it in as a switch with all the features: viewing ports, wired clients, topology and much more!
Hope this helps
AirHeads MVP Expert | Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744
If you like my posts, kudo's are welcome. If it solves your problem, please click 'Accept as Solution'