Network Management

Reply
Occasional Contributor I

Manually Adding Aruba 2930 series switches

Hey guys,

 

Figured this would have been asked before, but I couldn't find anything after a good search.

 

We have been monitoring our APs for a while now with Airwave. Looking to move switch monitoring over to Airwave for our 2930 series switches.

 

No Aruba switches seem to be present in the device listing for manually adding devices. There is a very limited assortment of HPE Procurve.

 

What should I use to add 2930 series switches? The Aruba device category assumes it is a wireless access point.

 

Thanks!

 

image.png

 

Re: Manually Adding Aruba 2930 series switches

I’ve added them before as “Aruba Device” and never had any issues :)

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Super Contributor I

Re: Manually Adding Aruba 2930 series switches

Hi

Make sure you are running the latest version of AirWave and add the Aruba 2930f as an Aruba device and you are good to go!

Works fine. The add device settings for an Aruba device are used by selecting the Aruba device, then AirWave does its ‘magic’ and will put it in as a switch with all the features: viewing ports, wired clients, topology and much more!

Hope this helps
Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744

If you like my posts, kudo's are welcome. If it solves your problem, please click 'Accept as Solution'
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: