Network Management

Reply
New Contributor

Mismatched configuration in Airwave

I have 2 Instant APs in their own group, and Airwave says that the configuration is mismatched and has from the start, I believe the reason being because I made a last minute configuration change in the Virtual Controller after I had input the Airwave IP but before I had accepted them into Airwave. I have tried to delete them including the group and folder and role and user account, but when I accept them back into Airwave the mismatch persists, is there a way to fix this?


Accepted Solutions
Highlighted
MVP Expert

Re: Mismatched configuration in Airwave

Hi,

 

To resovle mismatches navigate to

 

  • Groups>Template page and import latest template from device
  • IAP's APs/Devices>Audit page and click import settings
  • Try import setting from APs/Devices>manage page aswell, if any device specifi mismatch is there it will get resloved.

Regards.

Pavan

If my post addresses your query give kudos:)


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post


All Replies
Highlighted
MVP Expert

Re: Mismatched configuration in Airwave

Hi,

 

To resovle mismatches navigate to

 

  • Groups>Template page and import latest template from device
  • IAP's APs/Devices>Audit page and click import settings
  • Try import setting from APs/Devices>manage page aswell, if any device specifi mismatch is there it will get resloved.

Regards.

Pavan

If my post addresses your query give kudos:)


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: