Network Management

Contributor I

Missing Stats for APs and Clients

We are running Airwave and I'm seeing problems when I bring up graphs for APs and users. For APs I'll get a graph for sya Clients and there will be gaps of about 4 or 5 hours where the is no info in the graph. I'll look at a radio of an AP and the channel utilization will have no data available. Out WIFI network consists of approx. 1700 APs and during the peak of the day around 8200 clients. Anyone else seeing this issue.

Guru Elite

Re: Missing Stats for APs and Clients

I would open a TAC case in parallel to see if they can see why you are missing data.  There are a few scenarios like congestion on a management network and airwave being resource constrained that could cause that issue.  TAC would at least be able to look into it...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Contributor I

Re: Missing Stats for APs and Clients

Thanks Colin. I'll do that.

Search Airheads
Showing results for 
Search instead for 
Did you mean: