Network Management

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
New Contributor

Monitoring AMP Server via PRTG

A got a little problem with Airwave AMP server. I would like to monitor the AMP server via snmp (CPU usage, Memory usage, Disk usage etc.) with PRTG Monitoring System, but I cannot find the option where can I setup the snmp agent ( WebGui or CLI ) ?!

 

Version : AirWave Managment Platform 8.2.7  

 

Can you help with this or can you send me an article or documentation how can I get my purpose.

 

I attached a picture about the PRTG SNMP Tester program. I tried to get the device uptime. I dont have a firewall between the client and the server where I tried.

 

Thank you very much!


Accepted Solutions
Highlighted

Re: Monitoring AMP Server via PRTG

As an alternative you could try adding your NMS server under Amp Setup --> NMS on Airwave. AMP can send SNMPv1, SNMPv2 traps or SNMPv3 informs to NMS servers and also send the triggers to NMS.

Once the above is done you can create an trigger definition to alert CPU/Memory or disk utilization.
Untitled.png

Untitled.png

 

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)

View solution in original post


All Replies
Highlighted

Re: Monitoring AMP Server via PRTG

Looks like SNMP polling is not supported in the newer version of Airwave which is 8.2.4.1 and above, see the post related to the same:

 

https://community.arubanetworks.com/t5/Network-Management/Installation-and-Config-of-SNMP-Client-for-External-Monitoring/td-p/303757

-If you got what you need with my answer please give kudos and mark it as solution.
Highlighted

Re: Monitoring AMP Server via PRTG

As an alternative you could try adding your NMS server under Amp Setup --> NMS on Airwave. AMP can send SNMPv1, SNMPv2 traps or SNMPv3 informs to NMS servers and also send the triggers to NMS.

Once the above is done you can create an trigger definition to alert CPU/Memory or disk utilization.
Untitled.png

Untitled.png

 

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)

View solution in original post

Highlighted
New Contributor

Re: Monitoring AMP Server via PRTG

Thank you very much. This solution is acceptable for me for now :)

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: