Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Monitoring Cisco Catalyst 3850 Stacks in Airwave 8.2.9.1

This thread has been viewed 2 times

  • 1.  Monitoring Cisco Catalyst 3850 Stacks in Airwave 8.2.9.1

    Posted Nov 07, 2019 05:54 PM

    Hi All,

     

    Is anyone else monitoring Cisco Catalyst 3850 switch stacks in Airwave?  We've been monitoring them as generic Cisco Swtiches for a while in previous versions of Airwave with no issues, however upon upgrading to 8.2.9.1 all of these switches have now been discovered as 3850's instead complete with the individual members that make up the stack.

     

    All well and good, except now some of the switches that make up the stack show as down and no amount of polling will bring them back online!

     

    Deleting and re-adding the switch stack generates the same kind of behaviour, with the added bonus of the hostname no longer being present as apparently the polled switch is not master?

     

    Anyone else come across this featurette?

     

    Thanks,

    Matt.



  • 2.  RE: Monitoring Cisco Catalyst 3850 Stacks in Airwave 8.2.9.1

    EMPLOYEE
    Posted Nov 12, 2019 06:36 AM

    What exact message are  you seeing in Devices>monitor page of down switch and also in AMP device events section.



  • 3.  RE: Monitoring Cisco Catalyst 3850 Stacks in Airwave 8.2.9.1

    Posted Nov 22, 2019 07:21 AM

    Hi Pavan,

     

    Sorry for the late response - in the end I deleted them and re-added them to Airwave which seems to have done the trick although Topology now sees them as Controllers rather than Switches?

     

    Thanks,

    Matt.