Moving from Virtual Controller to Airwave!
09-06-2019 03:50 PM
I will keep this short. I have no experience in Airwave and limited experinece with servers as a whole but have been tasked in setting up a commercial wireless network.
What I've done so far:
- Built and configured ESXi and got AirWave installed and am able to login to the Aruba GUI.
- Have the IAP working and managed though the virtual controller.
My question is, what do I need to do to get the IAPs to be seen by Airwave? Im assuming that there is some VLAN stuff that needs to happen or some communication protcol stuff that I need to change.
Do I need a controller?
I know enough to know I dont know anything lol.
Re: Moving from Virtual Controller to Airwave!
09-06-2019 05:42 PM
Please take a look at the Airwave Instant deployment guide here: https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=35413
Come back here and ask questions before you do anything.
No, you don't need a separate controller.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide