Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

No way to see traps from the controller to IMC

This thread has been viewed 2 times

  • 1.  No way to see traps from the controller to IMC

    Posted May 04, 2017 05:36 AM

    Hello,

     

    I tried to add an Aruba controller 7205 on the IMC, but I get strange traps (see screenshot "Issue_IMC")

    There's also another thing, and I dont know if it is related, I configured the IMC as trap receiver on the controller, but on IMC, when I go to the controller and "trap destination" tab, I am not able to see any trap receiver ... (See screenshot "Issue_IMC2") and when I try to configure the trap manually on IMC, I got an error telling me there must be a SSH or SNMP issue...

     



  • 2.  RE: No way to see traps from the controller to IMC

    EMPLOYEE
    Posted May 04, 2017 08:53 AM

    Hi Alexis,

     

     Check AOS MIB guide for each trap detail  explanation.

     

    https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/13020/Default.aspx

     

    Regading HPE IMC issue, I would recommand to open TAC ticket with HPE IMC team.

     

    Regards,

    Pavan