Network Management

Reply
Occasional Contributor II

Possible to push changes from airwave to 1 or multiple AP's?

Hi i'm new to the airwave platform and would like to know if it would be possible to send commands over from the airwave controller over to 1 or multiple ap's/switches using them in read/write mode instead of using monitor mode.

For instance change the hostname or push running configs to multiple switches/ap's.

 

Any help would be greatly appreciated.

 

MVP Guru

Re: Possible to push changes from airwave to 1 or multiple AP's?

Yes, we can push config changes to mullitple IAPs/AP/Controllers in manage mode.

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Possible to push changes from airwave to 1 or multiple AP's?

Hi Pavan,

 

Is there a guide/pdf on how to do this?

 

MVP Guru

Re: Possible to push changes from airwave to 1 or multiple AP's?

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=14096

 

 

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: