Network Management

Reply
Highlighted
Occasional Contributor II

Recommended version of AIrWave

Hi,

 

is there a place where we can check the recommended version of AMP?

In support website, there is only one version for "current release" (8.2.4).

Does it mean that it's the recommended version? 

If no, where can I find this info?

 

Thanks for your help

BR

Fred

 


Accepted Solutions
Highlighted
MVP Expert

Re: Recommended version of AIrWave

Fred,

 

8.2.4 is the latest code, I would recommand to upgrade to latest code.

 

Note: In AMP 8.2.4, root CLI access removed.

 

Attached release note for your reference.


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post


All Replies
MVP Expert

Re: Recommended version of AIrWave

Hi Fred,

 

All  Airwave verisons upgrade/ISO packages available in support site only, there is no such recommanded Airwave version. In current release folder we see latest release code which is avaiable to download.

 

We always recommand to have server in latest code.

 

Regards,

Pavan

 

If my post addresses your query give kudos:)


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
Occasional Contributor II

Re: Recommended version of AIrWave

HI Pavan,

 

thanks for your reply.

 

Does it mean that you recommend the latest code: 8.2.4 or the latests codes 8.2.4 and 8.2.3.1?

 

Fred

Highlighted
MVP Expert

Re: Recommended version of AIrWave

Hi,

 

If you are planning to deploy new server, I would recommand to install AMP 8.2.4 code.

 

Regards,

Pavan


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
Occasional Contributor II

Re: Recommended version of AIrWave

I have an AMP 8.0.x.

I'm wondering if I should upgrade it to 8.2.4 or 8.2.3.1

 

What's your opinion?

 

Thanks

Fred

 

Highlighted
MVP Expert

Re: Recommended version of AIrWave

Fred,

 

8.2.4 is the latest code, I would recommand to upgrade to latest code.

 

Note: In AMP 8.2.4, root CLI access removed.

 

Attached release note for your reference.


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post

Highlighted
Contributor II

Re: Recommended version of AIrWave

FredM,

 

Please take a few minutes to read through this thread as well. 8.2.4 is a major change when it comes to CLI access.

 

https://community.arubanetworks.com/t5/forums/v3_1/forumtopicpage/board-id/NetworkManagement/page/6/thread-id/6890

 

Thanks,

-Herman

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: