Network Management

Reply
Contributor II

Spectrum monitor radio profile

I was useing the ASE site to create my Spectrum monitoring. I have 16 controllers and each is running a different group. Question: Do I need a different radio profile for each group or can I just use one profile for all 16 groups?

 

 

rf dot11a-radio-profile "spectrum-G1-sm"
mode spectrum-mode
exit

rf dot11g-radio-profile "spectrum-G1-sm"
mode spectrum-mode
exit

ap-group "G1-sm"
dot11a-radio-profile "spectrum-G1-sm"
dot11g-radio-profile "spectrum-G1-sm"
end

Brian Warren
Guru Elite

Re: Spectrum monitor radio profile

You can use the same one. Just remember if you change a setting, it changes everywhere the profile is used.

Sent from Nine<>

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: