Network Management

last person joined: 22 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

how to configure intervlan

This thread has been viewed 0 times

  • 1.  how to configure intervlan

    Posted Oct 25, 2018 11:02 AM

    aruba switch 2930F  
    interface vlan 10 =172.16.1.1

    interface vlan 20 =172.16.2.1

    PC 1 172.16.1.10/24 (port 1 untagged vlan 10 )
    PC 2 172.16.2.10/24 (port 2 untagged vlan 20 )

    how to configure PC1 can ping to PC2 

    at cisco switch just need enable ip routing 



  • 2.  RE: how to configure intervlan

    Posted Oct 25, 2018 11:28 AM

    That would do...

     

    No acl's are configured i assume?

    Can you ping your gateway?

    is the firewall disabled on the client?

    Is the mac-adress of the client learned on the interface and within the corrrect vlan?

     

     



  • 3.  RE: how to configure intervlan

    Posted Oct 26, 2018 01:00 AM

    1.no acl 
    2.pc ping to gateway OK!
    3.firewall disable 

    vlan 10 ping to vlan 20 fail !
    vlan 20 ping to vlan 10 fail !

     



  • 4.  RE: how to configure intervlan

    MVP EXPERT
    Posted Oct 29, 2018 06:03 PM
    Did you enable ip route on the Ruba switch?