Remote Networking

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
New Contributor

Re: Trouble connecting RAP-2WG to A200 running AOS 5.0.0.0

I know this is an older thread, but found this to be what I am trying to accomplish. I am also trying to setup a RAP-2WG with a A200 controller and am wondering how to provision the AP on the A200, considering the A200 does not support zero touch provisioning. When I have the 2WG connected to the same network as the controller, the RAP does not show up under the provisioning tab. Any information would be greatly appreciated.

Thank you,
Highlighted
Aruba Employee
Aruba Employee

Re: Trouble connecting RAP-2WG to A200 running AOS 5.0.0.0

If you read through the user guide on provisioning a RAP with a PSK that will lead you through the required steps to accomplish this.

-awl
Andy Logan, ACDX
Director, Strategic Account Solutions
Aruba Networks
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: