Security, WIDS/WIPS and Aruba ECS

Reply
Highlighted
Occasional Contributor II

How to Configure Server 2008 for Radius

We have been using Windows 2003 for our Radius with our 6000 controller but now we have to use Windows 2008 Server for Radius and we have tried everything to load this thing and get it to accept authentication.

Does anyone have a "how to" type guide in regards to configuring 2008 Server Radius for work with Aruba?

Any information would help a lot.

Thanks
Highlighted
Guru Elite

contact support

Please contact support. There is a doc but it is too large to post here.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Aruba Support

I have looked all over our Support Portal and do not see anything posted there.

Are you saying I have to ask Support directly for this?
Highlighted
New Contributor

Re: How to Configure Server 2008 for Radius

I tried contacting support and they told me to contact my network admin.....hmm that would be me.

any help would be great
Highlighted
Guru Elite

Try this link

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: