Occasional Contributor II

1 username of AD only use for 2 unique devices. [Question]

Hi guys,


I need to make clearpass dot1x service authentication source from AD.

Using policy 1 account/username can be authen 2 uniq device.


I've already try policy below.

1.authorize enpoint > uniq device count > getter than 2

2.authrize > source > AD


But, Didn't work!!!


All device can connect using sam username.


how to make this solution work?


good day.

MVP Expert

Re: 1 username of AD only use for 2 unique devices. [Question]

Set Endpoint (Authorization)> Unique Device Count > Equals = 2 or Less_ than _or_ equals to 2 and check the status.

Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
Showing results for 
Search instead for 
Did you mean: