Security

Reply
Valued Contributor I

Adding CPPM dictionary attribute to multiple endpoints at the same time

I'm building a service that takes "Internet of things" devices and places them into a particular named VLAN, e.g. Building BMS vlan gets (Audio/Video,Projectors,IP Security Cameras etc). Selection of this IoT service is by checking if a local attrubute UoY_IoT is true. I don't want to manually set this for every device in endpoints, but I'd think of "pump priming" lots of endpoints at once if possible.

 

A

Guru Elite

Re: Adding CPPM dictionary attribute to multiple endpoints at the same time

You can export the endpoints and then reimport them with the attribute.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Valued Contributor I

Re: Adding CPPM dictionary attribute to multiple endpoints at the same time

Cool, o.k. I can do that Thx A
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: