Security

Reply
Highlighted
New Contributor

Airgroup Controller AP Issues

I am new to Clearpass and have been tasked with zoning Airplay devices based on AP. I have added the IAP VC as an Airgroup Controller, but the AP count is 0 (should be 80+) while Roles is at the correct count. Is there a way for Clearpass to obtain the AP list? 

The IAP cluster is at 8.3.0.2 and Clearpass is at 6.7.5.108264.

 

Clearpass.png
Clearpass2.png

Clearpass3.png


Accepted Solutions
New Contributor

Re: Airgroup Controller AP Issues


All Replies
Highlighted
Moderator

Re: Airgroup Controller AP Issues

It’s not used with IAP.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
New Contributor

Re: Airgroup Controller AP Issues


@cappalli wrote:
It’s not used with IAP.

Is there a way then to zone airplay by AP with IAP and Clearpass?

 

Thanks,

Jessie

New Contributor

Re: Airgroup Controller AP Issues

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: