Security

Reply
Highlighted
Occasional Contributor II

Aruba OS 8.6 VRRP VIP and ClearPass RADIUS request

Hi,

currently, I have two controllers (8.6.0.4) configure as master standalone and standby standalone without MM, on clearpass I used the VIP to integrate and add these controllers in ClearPass.

but in the 801.x authentication request, I'm receiving the Master standalone IP address, not the VIP.

 

RADIUS Client under Advanced tab (NAS IPv4 address: VRRP VIP).

 

Highlighted

Re: Aruba OS 8.6 VRRP VIP and ClearPass RADIUS request

You can change the NAS IP address from within the RADIUS server configuration. Configuration --> Authentication --> Auth Servers.

Screenshot 2020-07-02 12.30.14.png

 

Highlighted
Occasional Contributor II

Re: Aruba OS 8.6 VRRP VIP and ClearPass RADIUS request

Mohammadalalami_0-1593673135567.png

 

thanks for the reply, already I changed it, but same with the same result.

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: