Security

Reply
Contributor II

CLEARPASS CLUSTER L3

Greetings,

 

anyone here who have tried to do CPPM cluster (publisher-subscriber) via L3? client will locate C2000 on (2)different sites with different MGMT I.P. however cluster requires virtual I.P but it seems its only applicable on L2.

 

primary services will be 802.1x wired and OnGuard Posture check via persistent agent.

 

any info will be greatly appreciated.

 

thank you very much 

Guru Elite

Re: CLEARPASS CLUSTER L3

Virtual IPs have no relationship to cluster operations.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Re: CLEARPASS CLUSTER L3

Hi harvey.ysip,

I didn't get your question. could you describe your question more?

What is C2000? Why need virtual for two different site?

Thanks.

Contributor II

Re: CLEARPASS CLUSTER L3

hi to all,

thank you for your replies

C2000 is a CPPM HW appliance.

correct me if im wrong.im planning to do cluster between 2 sites via L3 with 1xCPPM HW each.the objective is to share license across and have HA(publisher on headoffice, subscriber on DR)

thank you
Super Contributor II

Re: CLEARPASS CLUSTER L3

L3 between nodes is fine. At the nas devices just define the two IP’s.

Virtual IP across L3 is off course not possible

Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Contributor II

Re: CLEARPASS CLUSTER L3

hi willem,

ok i understand now that I cannot configure Virtual I.Ps since they are on L3.

does it mean i can still configure publisher-subscriber on 2 CPPMs? and I can still share licenses across the two?
Super Contributor II

Re: CLEARPASS CLUSTER L3

Sure! All features are available except virtual IP’s

Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Highlighted
New Contributor

Re: CLEARPASS CLUSTER L3

To form the cluster for your case, login to the DR CPPM and make scriber via Administration >> Server Manager after clicking on the hostname. After that key in the Publisher ip address and appadmin's password.

 

Thanks.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: