Security

Hello folk,

Hope all of you doing great

Can we configure CP on CPPM using http instead of https for guest access.

appreciate your input

Thanks,

Guest> Configuration> Authentication

Hi Colin,

First all of thanks for your promptness, I did it without positive result.

And I also tried to modify the login page on Controller itself from http to https, but when I did that it didn't work.

What does your captive portal authentication profile look like on the controller?  It should have a URL that points to the http://  version of the page on ClearPass...

I aware about this point, when I change it from https to http, it stop working and the webpage did not display, already the service on CPPM working and reachable, I test it using telnet <cppm> 80 from guest machine.

please find the attachment

Many thanks for your support

Hello All,

appreciate your inputs.

Regards,

The "Login Page" parameter should not point to an https:// page.  It should point to an http:// page...

Hi Colin,

I already change it to http, and it did not work, it did not appear the registration page totally.

http with TCP port 80 is okay with telnet test, but the page did not appears.

Any more suggestions.

Many thanks,

I think you should open a case with TAC.  I am out of ideas..

Did you also check the box 'use http' as well?  Your screenshot below.

Please open a TAC case, so that they can find out what your problem is.

Many thanks guys, I solve it, it was redirect ACL for http traffic .

Realy thanks for your great inputs.

Regards,