Security

Reply
New Contributor

CPPM with EAP-FAST

Hi,

 

We are trying to configure the CPPM for 802.1X auth for wired cleints. All the PC/Laptops are using the cisco any connect NAM where in a profile is configured to connec to the LAN. Screen shot shoen below.MOBI-NAM.png

 

There is no other settings done on this.The setting is being used across the offices globally where in cisco ISE is the radius server. But our location is using Aruba CPPM. We would like the CPPM also use the same profile to connect to LAN.We did the configuration and ended up in the below error.

 

CPPM-ER.png

 

 

I would like to know whether this will work with CPPM as mentioned above.

 

Appreciate your valuable inputs...

 

Faiz

 

Guru Elite

Re: CPPM with EAP-FAST

Is this EAP-FASTv1 or EAP-FASTv2?

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Re: CPPM with EAP-FAST

Hi,

 

I am not sure of the EAP-FAST version used here. I didnt see anything specific related to the version.

 

Faiz

Guru Elite

Re: CPPM with EAP-FAST

Please look in ISE. EAP-FASTv2 is Cisco proprietary.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Re: CPPM with EAP-FAST

Hi Tim,

 

It looks it uses version 1.

 

I have go the below wireshark output 

 

EAP-FV.png

Guru Elite

Re: CPPM with EAP-FAST

Please open a TAC case.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: