Security

Reply

Can i configure Onconnect in front of Juniper EX4300?

Hi AirHeads,

When trying to configure simple OnConnect enforcement based on SNMP in front of Juniper EX4300 (17.3R31 Version)

Im getting an alert on the CPPM:

 

SNMP SERVICE: VLAN enforcement not supported for NAD = XXX.XXX.XXX.XXX (The Switch IP)

 

Please advise,

Does Junipers switches supporting OnConnect capabilites ?

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted
Guru Elite

Re: Can i configure Onconnect in front of Juniper EX4300?

Juniper is not supported with OnConnect due to their lack of support for SNMP write. The ClearPass Solution Guide for Wired Policy Enforcement has configurations for all supported switches.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: Can i configure Onconnect in front of Juniper EX4300?

Thank u!

Appreciate your fast response.

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: